TM-50

The TM-50 is a versatile and flexible Tape and Reel solution designed for manual and automoated process.

Let’s discuss your application

Speak with our experts today to discuss bespoke dimensions and specifications, pricing, and further details.

  • Dimensions
    • H: 380mm x W 1400mm x D 520mm
  • Power
    • 120/230 VAC, 50/60 Hz
  • Air
    • 80 PSI
  • Accomodates 8 – 72mm wide carrier tape (up to 120mm wide with TM-50XL)

  • Adujustable track assembly for tape widths up to 72mm (TM-50XL – 120mm)
  • Independently controlled seal temprature for each side of the cover tape
  • Dual stage, fully adjustable heat and PSA sealer assembly
  • User-friendly software assures ease of set up and operation
  • Software controlled advance movement of carrier tape (2mm – 244mm pitch)

  • Vacuum pen
  • Empty pocket detector
  • Full sensor package
  • Vision Inspection for pin 1, and mark verification
  • Software package

We understand that all applications are unique and have their own challenges, that’s why our dedicated support team are on hand to help you when it matters most.

The TM-50 is a slimline tabletop tape and reel solution from V-TEK. Designed to handle large, small, or difficult to place parts, the TM-50 makes it easy for operators to handle these parts and place them into tape.

Precise and smooth operation is made easy with the use of the microprocessor-controlled sealer and stepper motor drive, assuring precise handling of all taping parameters. To Minimise part jumping when placed into tape, operators have several selectable speeds at their disposable to help accommodate this.

Thanks to the innovative design, setup and reel change overs are fast and easy, allowing taping operators to setup, change input and output reels in minutes. There are three models to choose from.

  • TM-50
  • TM-50XL
  • TM-50OEM

The TM-50 range from V-TEK can accommodate tape widths from 8mm – 120mm and support pitches up to 144mm. The versatility of the system allows for operators to manually pick and place parts into tape where low-volume and high-mix parts are being picked. Production can also be automated using the TM-50OEM where high-volume and high-mix parts are being picked by a robot.

Each model variation can be fully equipped with a vision inspection system that can check for empty pockets, pin 1, mark verification, and part orientation. This adds a further level of automation to any model and minimising operator intervention.

Related products